Owing to our 52 years of enormous industrial experience in this domain, we are betrothed in providing top notch quality Flexible Footwear PVC Compound. To process this product at our well-equipped unit, our skilled professionals use superior grade polyvinyl chloride and innovative methodology. The offered product is widely demanded to be used in footwear industry to manufacture and design slipper, shoes, sandals, boots and loafers. We provide this Flexible Footwear PVC Compound to the clients at cost effective prices.
Key points:
- High purity level
- Longer shelf life
- Safe to use
- No additives
TECHNICAL DATA SHEET
- Polyvinyl Chloride Compound
- F 224 So is a flexible injection moulding vinyl blend; it combines good abrasion & flex resistance; used in Footwear Industry.
| PROPERTIES | STANDARD | UNIT | TYPICAL VALUE |
| PHYSICAL | |||
| Appearance |
|
| Granular |
| Specific Gravity | ASTM D 792 |
| 1.22 ± 0.03 |
| MECHANICAL | |||
| Hardness | ASTM D 2240 | Shore A | 65 + 3 |
| Tensile Strength (min.) | ASTM D 638 | MPa | 8 |
| Elongation at Break (min.) | ASTM D 638 | % | 300 |
| Abrasion Resistance (max.) | IS 15298 | mm3 | 75 |
| PROCESSING INFORMATION | |||
| Temperature Range |
| oC | 155-165 |
For better results pre-drying of granules is recommended @ 75 ± 5°C for approximately 15 minutes
Owing to our 52 years of enormous industrial experience in this domain, we are betrothed in providing top notch quality Flexible Footwear PVC Compound. To process this product at our well-equipped unit, our skilled professionals use superior grade polyvinyl chloride and innovative methodology. The offered product is widely demanded to be used in footwear industry to manufacture and design slipper, shoes, sandals, boots and loafers. We provide this Flexible Footwear PVC Compound to the clients at cost effective prices.
Key points:
- High purity level
- Longer shelf life
- Safe to use
- No additives
TECHNICAL DATA SHEET
- Polyvinyl Chloride Compound
- F 224 So is a flexible injection moulding vinyl blend; it combines good abrasion & flex resistance; used in Footwear Industry.
| PROPERTIES | STANDARD | UNIT | TYPICAL VALUE |
| PHYSICAL | |||
| Appearance |
|
| Granular |
| Specific Gravity | ASTM D 792 |
| 1.22 ± 0.03 |
| MECHANICAL | |||
| Hardness | ASTM D 2240 | Shore A | 65 + 3 |
| Tensile Strength (min.) | ASTM D 638 | MPa | 8 |
| Elongation at Break (min.) | ASTM D 638 | % | 300 |
| Abrasion Resistance (max.) | IS 15298 | mm3 | 75 |
| PROCESSING INFORMATION | |||
| Temperature Range |
| oC | 155-165 |
For better results pre-drying of granules is recommended @ 75 ± 5°C for approximately 15 minutes
Plot No. 52, 2nd Floor, Sector 32, Institutional Area, Gurgaon, Haryana, 122003, India
Phone :+917042510721